|
terminal devices families GB b>
The basic family of terminal devices of Sledat the GB (GPRS Box). The devices are fully developed and manufactured in Slovenia b> with its own knowledge and technology. In the four years of development, we have put in the production of five generations GB devices. The devices are with each generation of smaller, more stable, sparing, with more exits, and generally support more functions. GB terminal device can be used both for tracking of vehicles or vessels b> as well as control facilities b> oz. for the transfer of control and telemetry data. For all terminal devices GB is that operating in the GSM network operators throughout the world. They are also software upgradeable as hardware b> and can be linked to various external or internal functional accessories (modules).
terminal devices - vehicle tracking b>
GB terminal device to be installed in a vehicle or vessel b>, can be used tracking and monitoring the movement of the various parameters. It can be used as an alarm GPS b>, which at the illicit movement warned the owner to potential danger of theft b>. Through the web interface it is possible to observe the movement of vehicles b> on the map, its history and status. With additional modules on the device (eg imobilizacijski module) can be a vehicle to manage ... for example, start the engine block or activate the additional heater on cold winter mornings.
terminal devices - control of objects b>
GB terminal devices can be installed as a central control b> for remote monitoring and management of various parameters on the premises. Through the web interface is also possible to monitor the temperature, fluid levels, condition of batteries and power supply status of the operation of heating and cooling, Pir alarm sensors, smoke sensors ... Each measured parameter is displayed in real time b> or on the claim as history in a graph. The web interface is offered to sending commands b>, which can be activated or deactivated a certain lots within the facility (eg, turn on the heat). GB terminal device operating in the GSM network and thus does not need a wired line (telephone prikjuček), the power supply can also apply a battery, which makes it ideal for control vikendov b> and other non-occupied buildings.
_____________________________________
GB-0610 - the first generation b>
Our first terminal device - with all the strengths and weaknesses of their own development. GB-0610 was used primarily for locating and monitoring vehicles, because not yet had its own memory or terminal-side calculating mileage. Because of cheaper and higher-capacity younger brothers GB-0610 is no longer in use.
Dimensions: b> 116 mm x 82 mm x 36 mm
Weight: b> 295 g
Power: b> 10-16V DC
Cons: b> 120-150 mA @ 12V (active GPRS connection and prikjučen GPS)
Temperature range: b> -20 ° C ~ +60 ° C
Digital Input: b> 1 x entrance to the contact (engine up to 28 V DC), 4 x input for the key / switch
GSM: b> 850 / 900 / 1800 / 1900 MHz
GPRS: b> class B
GPRS Multislot : b> class 10
GPS power: b> 5V / 150 mA
GPS physical protocol: b> RS-232-C
GPS data format: b> NMEA
_____________________________________
GB-0620 - the second generation b>
Our second terminal device - with all the strengths and weaknesses of their own development. GB-0620 was used primarily for locating and monitoring vehicles, the light of the precursor of the GB-0620 the first terminal is where we address the dual processor architecture. Because of cheaper and higher-capacity younger brothers also GB-0620 is no longer in use.
Dimensions: b> 116 mm x 82 mm x 36 mm
Mass: «/ b> 295 g
Power: b> 10-16V DC
Cons: b> 120-150 mA @ 12V (active GPRS connection and prikjučen GPS)
Temperature range: b> -20 ° C ~ +60 ° C
Digital Input: b> 1 x entrance to the contact (engine up to 28 V DC), 4 x input for the key / switch
GSM: b> 850 / 900 / 1800 / 1900 MHz
GPRS: b> class B
GPRS Multislot : b> class 10
GPS power: b> 5V / 150 mA
GPS physical protocol: b> RS-232-C
GPS data format: b> NMEA
_____________________________________
GB-3000 - third generation b>
The first in a series of modular upgradeable Sledat terminal facilities. In addition to expansion I / O we are led to introduce the device to continue:
- The possibility logiranja traveled route (very appropriate for the rest of the world - logirana the path is not lost, even if the terminal disconnect from power supply)
- The possibility of polling
- The possibility of connection to the module for the immobilizer
Dimensions: b> 116 mm x 82 mm x 36 mm
Weight: b> 307 g
Power: b> 10-30V DC
Cons: b> 120-150 mA @ 12V (active GPRS connection and prikjučen GPS)
Temperature range: b> -20 ° C ~ +60 ° C
Digital Input: b> 1 x entrance to the contact (engine up to 28 V DC), 4 x input for the key / switch
Outputs: b> 1 x optosklopni output (60mA / 70V / 140 mW)
Communication: b> 2-vascular TX / RX RS-232 line
GSM: b> 850 / 900 / 1800 / 1900 MHz
GPRS: b> class B
GPRS Multislot : b> class 10
GPS power: b> 5V / 150 mA
GPS physical protocol: b> RS-232-C
GPS data format: b> NMEA
Internal memory: b> to 2048 sites
Configuration: b> with a PC (Win) application
Connectivity (accessories): b> link to the Garmin navigators, the module for the immobilizer
_____________________________________
GB-3010 - the fourth generation b>
Beginning a new phase of development Sledat terminal facilities:
- Robustnejša Technology
- Increased internal memory
- The possibility of configuring through short (SMS) messages
- Increased volume of additional (extension) modules
- Increased volume of I / O interfaces
Dimensions (ŠxVxD): b> 161 mm x 31 mm x 118 mm
Weight: b> 332 g
Power: b> 8-24V DC
Cons: b> 50-60 mA @ 12V (active GPRS connection and prikjučen GPS)
Temperature range: b> -20 ° C ~ +60 ° C
Digital Input: b> 2 x 5-30V input, 6 x entrance to the key / switch
Outputs: b> 1 x optosklopni exit (150m / 300V / 150 mW)
Measurement temperature: b> 1-wire temperature sensor DS18S20
Communication: b> 1 x 2-vascular TX / RX RS-232 line (console), 1x 1-vascular TX RS-232 line (printer, logger), 1x FCC 8 / 8 expansion connector
GSM: b> 850 / 900 / 1800 / 1900 MHz
GSM TX: b> 850/900 MHz - Class 4 (2W), 1899/1900 MHz - Class 1 (1 W)
GSM RX: b> - 106dBm
GPRS: b> class B
GPRS Multislot : b> class 10
GSM code scheme: b> CS1-CS4
GPS power: b> 3V / 100 mA
GPS physical protocol: b> RS-232-C
GPS data format: b> NMEA
Internal memory: b> to 8192 sites
Configuration: b> with a PC (Win) application via GPRS, via SMS
Connectivity (accessories): b> link to the Garmin navigators, the immobilizer module, the module for communication with the OBD-II vehicle interface, the module for the measurement of fuel level, RFID reader, the temperature sensor
_____________________________________
GB-3011 - the fifth generation b>
Improved version of GB-3010, a much smaller volume of the device, as the president of GB-3010, 30% higher.
Dimensions (ŠxVxD): b> 125 mm x 31 mm x 115 mm
Weight: b> 264 g
Power: b> 8-24V DC
Cons: b> 50-60 mA @ 12V (active GPRS connection and prikjučen GPS)
Temperature range: b> -20 ° C ~ +60 ° C
Digital Input: b> 2 x 5-30V input, 6 x entrance to the key / switch
Outputs: b> 1 x optosklopni exit (150m / 300V / 150 mW)
Measurement temperature: b> 1-wire temperature sensor DS18S20
Communication: b> 1 x 2-vascular TX / RX RS-232 line (console), 1x 1-vascular TX RS-232 line (printer, logger), 1x FCC 8 / 8 expansion connector
GSM: b> 850 / 900 / 1800 / 1900 MHz
GSM TX: b> 850/900 MHz - Class 4 (2W), 1899/1900 MHz - Class 1 (1 W)
GSM RX: b> - 106dBm
GPRS: b> class B
GPRS Multislot : b> class 10
GSM code scheme: b> CS1-CS4
GPS power: b> 3V / 100 mA
GPS physical protocol: b> RS-232-C
GPS data format: b> NMEA
Internal memory: b> to 8192 sites
Configuration: b> with a PC (Win) application via GPRS, via SMS
Connectivity (accessories): b> link to the Garmin navigators, the immobilizer module, the module for communication with the OBD-II vehicle interface, the module for the measurement of fuel, RFID reader, the temperature sensor
|
|
|
|